Brocade Communications Systems PowerConnect B-FCXs Release Note page 54

Ironware software release r07.2.00a for brocade fesx, fsx, sx, fcx, fgs, fgs- stk, fls, fls-stk, and fws switches
Table of Contents

Advertisement

Defect ID: DEFECT000311921
Summary: When trial license and permanent license are installed on the system, the trial license will
never expire but keeps sending syslog messages.
Symptom: Customer will see that license is going to expire for every one hour . This happens only when
the valid trial license and permanent license are present on the box.
Workaround: Delete trial license, when the permanent license is installed.
Feature: FCX SW License
Reported In Release: FI 07.2.00
Defect ID: DEFECT000319339
Summary: On FWS and FGS platforms, DHCP Snooping does not work with an ACL configured on the
same port with multiple tagged VLANs
Symptom: On the FWS and FGS platforms, if DHPC Snooping is configured on the same port for multiple
tagged VLANs and an ACL is configured on that port or the port that the DHCP server is located
on, then only the 1st DHCP client on that port will be added to the DHCP Snooping table.
Workaround: There is no workaround if you want to use ACLs on ports that have this feature enabled.
You will need to remove the ACL on the ports in order for DHCP Snooping to work
properly.
Feature: FCX ACL
Reported In Release: FI 07.2.00
Defect ID: DEFECT000319853
Summary: On FCX, IP source guard configured at interface level on tagged ports may impact DHCP
snooping and DAI functionality configured on these VLANs.
Symptom: On FCX, IP source guard configured at interface level on tagged ports may impact DHCP
snooping and DAI functionality configured on these VLANs.
Workaround: With acl-per-port-per-vlan enabled, configure IP source guard at the VLAN level for each
port.
Feature: FCX ACL
Reported In Release: FI 07.2.00
Defect ID: DEFECT000320487
Summary: FCX stack does not use the persistent MAC after a reload if hitless fail-over is disabled.
Symptom: FCX stack does not use the persistent MAC after a reload if hitless fail-over is disabled.
Workaround: Use 'stack mac' instead of 'persistent mac'.
Feature: FCX Stacking
Reported In Release: FI 07.2.00
IronWare Software Release 07.2.00a for Brocade FastIron switches
Release Notes v 1.0
Technical Severity:
Function:
Other
Probability:
High
Technical Severity:
Function:
DHCP Snooping functionality
Probability:
Medium
Technical Severity:
Function:
DHCP Snooping functionality
Probability:
Medium
Technical Severity:
Function:
Master-Standby election
Medium
Medium
Medium
Medium
Page 54 of 55

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ironware

Table of Contents