NOTE: Edge Layer 3 images are supported in the FastIron (hardware) models listed in Table 9. These
features are also supported with software-based licensing. For details, refer to the chapter "Software-
based Licensing" in the FastIron Configuration Guide.
Table 9 Supported edge Layer 3 features
Category and description
OSPF V2 (IPv4)
Full RIP V1 and V2
Route-only support (Global configuration level only)
Route redistribution
1020 routes in hardware maximum
VRRP-E
IronWare Software Release 07.2.00a for Brocade FastIron switches
Release Notes v 1.0
FGS-EPREM
FLS-EPREM
FWS-EPREM
FWSG-EPREM
Yes
Yes
Yes
Yes
Yes
Yes
Page 26 of 55