Self Help - Bosch SHE7PT52UC Operating Instructions Manual

Instructions for use
Hide thumbs Also See for SHE7PT52UC:
Table of Contents

Advertisement

Available languages

Available languages

Self Help

Dishwashers may occasionally exhibit problems that are unrelated to a mal-
function of the dishwasher itself. The following information may help you
with a dishwasher problem without involving a repair professional.
Problem
1. Door may not be properly
latched
2. Unit may not be turned on
3. Unit not reset or previous cycle
not completed
Dishwasher
4. Delay start engaged
does not
5. Interruption of electrical power
start
supply to dishwasher or blown
fuse.
6. The door may have been closed
without first selecting a cycle
7. Water supply may not be turned on
Display
1. A fuse may have been blown or
does not
circuit breaker tripped
illuminate
2. Door not closed or latched
Note: For models with controls on
top of the door, the display only illu-
minate when the door is opened and
controls are visible.
Dishwasher
1. Incoming water is not warm
seems to
enough
run a long
2. Cycle time can vary due to soil
time
and water conditions
3. Rinse aid dispenser is empty
4. Dishwasher connected to cold
water supply
Note: Refer to "Wash Cycle Informa-
tion" section in this manual for typi-
cal cycle lengths
Detergent
1. Improper operation of detergent
dispenser
cover
cover will
2. Previous cycle has not been fin-
not shut
ished or rest or cycle or inter-
rupted
Unable to
1. Previous cycle has not finished
select
desired
cycle
Cause
Action
1. Shut the door completely until you
hear a click
2. Press the main power switch to
turn unit on
3. To reset, refer to "Cancel a Cycle"
section in this manual
4. To reset, refer to "Delay Start"
section in this manual
5. Check circuit breaker
6. Select a cycle and close the door
(for hidden controls only).
7. Check and turn on water supply
1. Check the fuse or circuit breaker
box and replace the fuse or reset the
breaker if necessary
2. Ensure door is properly latched
and completely closed
1. Before starting a cycle, run hot
water faucet at the sink closest to
the dishwasher
2. Sensors in the dishwasher auto-
matically increase the cycle time to
ensure a good wash when heavy soil
is detected
3. Add rinse aid
4. Verify dishwasher is connected to
hot water supply plumbing
1. Refer to "Adding Detergent and
Rinse Aid" section of the manual for
instructions on opening and closing
the dispenser
2. Refer to the "Operating the Dish-
washer" section of the manual
1. Refer to the "Operating the Dish-
washer" section of the manual
22

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents