Self Help - Bosch SHE53L Use And Care Manual

Dishwashers may occasionally exhibit problems that are unrelated to a malfuncion of the dishwasher itself. The following informa
ion may help you with a dishwasher problem without involving a repair professional.
1. Door may not be properly latched.
2. Unit may not be turned on.
3.
ed.
4. Delay start engaged.
5. Interrupion of electrical power supply to dish
washer or blown fuse.
6. Child lock acivated (select models).
7. The door may have been closed without irst
selecing a cycle.
8. Water supply may not be turned on.
Default factory seings alert the customer that the
cycle has completed by beeping. This feature can
be deacivated if so desired.
1.
tripped.
2. Door not closed or latched.
Note: For models with controls on the top porion
opened and controls are visible.
1. Incoming water is not warm enough.
2. Cycle ime can vary due to soil and water condi
a long ime ions.
3. Rinse agent dispenser is empty.
4. Dishwasher connected to cold water supply.
Note: Refer to "Cycle Chart Data" secion in this
manual for typical cycle length.
1. Spray arm movement is obstructed.
geing clean 2. Spray arm nozzles clogged.
3. Improper use of detergents.
4. Filters could be clogged.
5.
gether.
6.
condions.
1. Rinse agent dispenser is empty. (Rinse agent
not geing indicator is acivated).
2. Improper loading of dishes.
3. Selected cycle does not include drying.
Note: Plasic or Telon do not typically dry as com
ies.
Acion
1. Shut the door completely.
2. Press the main power switch to turn unit on.
3. To reset, refer to "Canceling or changing the cycle" secion
in this manual.
4. To reset, refer to "Delay Start" secion in this manual.
5. Check circuit breaker.
6. Deacivate the child lock. Refer to "Child Lock" secion in
this manual if applicable.
7. Select a cycle and close the door.
8. Check and turn on water supply.
To adjust the volume or deacivate, refer to "Cycle Compleion
Signal" secion in this manual.
1.
or reset the breaker if necessary.
2.
closed.
1. Before staring a cycle, run hot water faucet at the sink
nearest to the dishwasher.
2. Sensors in the dishwasher automaically increase the cycle
ime to ensure a good wash when heavy soil is detected.
3. Add rinse agent.
4.
ing.
1.
rotaing spray arms.
2.
Clean the Spray Arm Nozzles" in Care and Maintenance
secion of this manual.
3.
hardness. Refer to Table under "Adding Detergent and
Rinse Agent".
4. Clean the ilter. Refer to "Check/Clean the Filter System"
under Care and Maintenance secion of this manual.
5.
the dishwasher. See also "Preparing and Loading" secion
of this manual.
6. Refer to "Wash Cycle" secion in Operaing the Dishwasher
secion of this manual.
1. Add rinse agent. The use of rinse agent improves drying.
2. Rearrange load to ensure items are not nested. Refer
also to the "Preparing and Loading" secion of this
manual.
3. Rinse and Hold seing does not include drying cycle,
Note: Select models ofer an extra heaing opions to im
prove drying performance. Refer to "Wash Cycle opions"
under the Operaing the Dishwasher secion of this manual.