Miscellaneous Problems - Fujitsu LifeBook C1410 User Manual

clio.book Page 56 Friday, June 2, 2006 10:37 AM
L i f e B o o k C 1 4 0 0 S e r i e s N o t e b o o k - S e c t i o n F i v e
Problem
The display has bright or If the spots are very tiny and
dark spots. few in number, this is normal
for a large LCD display.
If the spots are numerous or
large enough to interfere with
your operation needs.
The application display You are running an application
uses only a portion of your that does not support 1024 x
screen and is surrounded 768 pixel resolution display
by a dark frame. and display compression is
enabled.
The Display is dark when The Power Management utility
on battery power. default is set on low brightness
to conserve power.
You have connected an Your BIOS setup is not set to
external monitor and it enable your external monitor.
does not display any
information.
Your external monitor is not
properly installed.
Your operating system soft-
ware is not setup with the
correct software driver for
that device.
You have connected an Your external monitor is not
external monitor and it compatible with your LifeBook
does not come on. notebook.

Miscellaneous Problems

An error message is Application software often
displayed on the screen has its own set of error
during the operation of message displays.
an application.
56
Possible Cause
This is normal; do nothing.
Display is faulty; contact your support representative.
Display compression gives a clearer but smaller
display for applications that do not support 1024 x
768 pixel resolution. You can fill the screen but have
less resolution by changing your display compres-
sion setting, (See the Video Features submenu,
located within the Advanced menu of the BIOS. (See
BIOS Setup Utility on page 27 for more information)
Press [Fn] + [F7] to increase brightness or double-
click on the battery gauge and adjust Power Control
under battery settings.
Toggle the video destination by pressing [Fn]+ [F10]
together, or check your BIOS setup and enable your
external monitor. (See the Video Features submenu,
located within the Advanced Menu of the BIOS. (See
BIOS Setup Utility on page 27 for more information)
Reinstall your device. (See External Video Port on
page 46 for more information)
Check your device and operating system
documentation and activate the proper driver.
See your monitor documentation and the
External Monitor Support portions of the
Specifications section. (See Specifications on page 69
for more information)
See your application manual and help displays
screens for more information. Not all messages are
errors some may simply be status.
Possible Solutions