Problems - Fujitsu DESKPOWER 6000/SS Series User Manual

1 Problems

This section identifies problems relating to each function.Read wherever applicable.
The access lamp stays off.
The PC may be faulty. Consult with the Fujitsu Service Center or the store where you purchased
this computer.
Nothing appears on the display.
Check the following:
Is the display power switch turned on?
Is the energy-saving mode set? Move the mouse or press any key.
Is the display cable connected correctly?
Is the display cable connected to the outlet?
WARNING
Are the brightness and contrast controls of the display adjusted correctly? Adjust the screen
using these controls.
The screen sways.
Is there any substance generating a strong electromagnetic field (ex. TV) near the display? If
any, keep it away from the display.
The left and right sides of the screen are concealed.
Use the display control button to adjust the horizontal screen size.
Data cannot be written to or read from a floppy disk.
Check the following:
Is the floppy disk drive head dirty? If so, use an appropriate cleaning floppy disk to clean the
head.
Is the floppy disk write-protected? If so, set the write-protect notch of the floppy disk to the
write-enable position.
50
Be sure to turn the power off before reconnecting the cable.
Otherwise, an electric shock may occur.