Maintenance; Emptying Dirt Cup; Dirt Cup; Dirt Cup Handle - Hoover UH40080 Owner's Manual

Familiarize yourself with these home maintenance tasks . Proper use and care of your cleaner
will ensure continued cleaning effectiveness .

Dirt cup

The dirt cup assembly consists of the
following parts:
Lid (A)
Dirt Cup (B)
Pre-filter (C)
HEPA Cartridge Filter (D)
Dirt Opening (E)
Handle (F)
While the cleaner is in operation, the pre- filter
screen will stop larger debris from entering the
HEPA cartridge filter chamber . This larger
debris will be seen collecting in the left side of
the dirt cup . The HEPA cartridge filter will
collect fine particles that have passed through
the pre-filter screen .
When to empty
We recommend that the dirt cup be emptied
before the dirt reaches the dirt opening on
back of cup (Fig . 3-1) or after every use if you
prefer .
How to empty
3.2
Disconnect cleaner
from electrical
outlet. Do not use
cleaner without dirt
cup or filters in
place.
Remove cup - Lift
up slightly and
firmly pull cup
straight out .

3. MAINTENANCE

3.3
A
Clean filter - Turn
knob (A) on top of
dirt cup lid one full
turn .
3.1
A
F
B
CAUTION: Very fine materials, such as face
powder or cornstarch, may seal the filter and
cause loss of suction. When using the cleaner
for this type of dust, empty the cup and
clean the filters often.
3.4
Empty cup -
Remove lid .
Note: It is not
necessary to
remove the HEPA
cartridge filter to
empty the dirt cup .
Tap side of cup
until no more dust
particles fall from
the HEPA cartridge
filter .
Actual model may vary from images shown.
9
E
D
C
3.5
Replace cup -
Replace dirt cup lid .
Slide cup into place .
Press firmly until
cup locks in place .