Connecting Headphones; Connecting A Basic Home Theater System; Connecting A Home Theater System With Multiple Devices; Using The Remote Control - Dynex DX-40L261A12 User Manual

Using the remote control

Connecting headphones

The TV speakers are muted when headphones are
attached.
Warning
Loud noise can damage your hearing. When using
headphones, use the lowest volume setting on your
headphones that still lets you hear the sound.
To connect headphones:
• Connect headphones to the
your TV.

Connecting a basic home theater system

Using digital audio
To connect a basic home theater system using digital audio:
1 Make sure that your TV's power cord is unplugged and the home
theater system is turned off.
2 Connect a digital coaxial audio cable to the digital output jack on
the back of your TV and to the digital coaxial audio jack on the
digital home theater system.
(headphone) jack on the back of
Side of TV
Digital audio
Side of TV
cable
Home theater system
Connecting a home theater system with
multiple devices
Blu-ray player/DVD player/VCR
Game console or camera
USB flash drive
Computer
The connections you make depend on the video and audio jacks
available on your devices. Refer to the documentation that came with
your devices for connection information.
Remember to use the best connection types available for the best
picture and sound. For information about connection types, see "What
connection should I use?" on page 7.
Using the remote control

Installing remote control batteries

To install the remote control batteries:
1 Remove the battery cover.
2 Insert two AAA batteries into the battery compartment. Make
sure that you match the + and – symbols on the batteries with
the + and – symbols in the battery compartment.
DX-40L261A12
Cable or satellite TV box
AV receiver
Antenna or cable TV
connected directly to
the wall jack
15