Dynex DX-40D510NA15 Quick Setup Manual

QUICK
SETUP GUIDE
40" LED TV
DX-40D510NA15
Thank you
for purchasing this state-of-the-art
Dynex television. We hope you enjoy
the quality and reliability of this
television for years to come.
Included accessories
1
4
7
PICTURE AUDIO MTS/SAP SLEEP
INPUT
VOL
MENU
DX-RC5NA-15
FIND YOUR
USER GUIDE ONLINE!
We are going green so a copy of your
User Guide is not provided in the box
but is available online.
Go to www.dynexproducts.com,
click Support & Service, enter your
model number in the box under Manual,
Firmware, Drivers & Product Information,
then click Search.
M4 screws (14 mm length)
(4 pcs.)
ST4 screws (12mm length)
(4 pcs. )
START HERE
How do I attach the stand to my TV?
(not for wall mounting)
You'll need: Phillips screwdriver and a soft surface to lay the TV on.
A Carefully place your TV face-down on a cushioned, clean surface to
protect the screen.
B Secure the stand column to your TV with the four provided
M4 × 14 mm screws (the longer ones).
C Find the front of the TV stand, then secure it to the stand column
with the four provided ST4 × 12 mm screws (the shorter ones).
- OR -
How do I prepare my TV for wall mounting?
(not for use with a TV stand)
A Carefully place your TV face-down on a cushioned, clean surface
to protect the screen.
B See the instructions that came with your wall mount for more
information about how to correctly mount your TV.
Which cables do you have?
Your TV has several di erent jacks for connecting devices. For the
best video quality, use the best available connection.
STOP!
VIDEO QUALITY
Do not plug your
power cord in until all
other devices have BEST
been connected.
BETTER
Component video and analog audio
GOOD
Composite video and analog audio (AV)
GOOD
Note: You can also connect a DVI device to your TV. See your online User Guide for
connection instructions.
Features
Remote control
Front view
and two AAA batteries
2 3
5 6
8 9
0
INFO*
CH
ENTER
EXIT
Power indicator
Remote control sensor
Note: The control buttons are on the
bottom edge of the screen.
Stand column
Back view
TV stand
(Coaxial)
Note: Images do not necessarily represent the exact design of your television.
B
A
M4 (14 mm) screws
A
MAKING CONNECTIONS
How do I watch TV (cable or satellite box) and/or connect a device such as a
DVD or Blu-ray disc player, game station, or camcorder?
JACK TYPE CABLE CONNECTOR
Using an HDMI cable (BEST)
HDMI video/audio
Coaxial video/audio
Using component cables (BETTER)
- OR -
Using an AV cable (GOOD)
MENU INPUT V O - L VOL+ CH CH
How do I connect my TV to an antenna or cable wall jack?
Before using your new product, please read these instructions to prevent any damage.
Front
B
Wall mount installation guide
(not included)
AUDIO/VIDEO OUT
Component cable option
(Coaxial)
Note: Connect the yellow video
cable to the green VIDEO/Y jack
on the back of your TV.
AV cable option
C
ST4 (12 mm) screws
Multi-purpose jacks: You can plug any
device that uses HDMI into either HDMI jack.
However, certain devices must be plugged
into the HDMI1 (DVI) jack. See the
documentation that came with your DVI
device.
Note: The component and AV jacks
are shared. This means you can
connect only one component or AV
device at a time. We suggest
upgrading to HDMI if your device
supports it.
AUDIO/VIDEO
OUT
CABLE
OVER