Adjusting The Projector Function ("Prj-Adj1/2" Menu); Auto Sync (Auto Sync Adjustment); Auto Power Off Function; Auto Restart Function - Sharp PG-LW2000 Operation Manual

Adjusting the Projector Function ("PRJ-ADJ1/2" Menu)

Q PRJ-ADJ1
Pict. SIG
1
Auto Sync
2
Auto Power Off
3
Auto Restart
4
Speaker
5
Fan Mode
6
System Lock
7
Keylock
SEL./ADJ.
1 Auto Sync (Auto Sync
Adjustment)
Selectable
items
On Auto Sync adjustment will occur when
the projector is turned on or when the
input signals are switched, when
connected to a computer.
Off Auto Sync adjustment is not
automatically performed.
Note
• Auto Sync adjustment is also performed by
pressing AUTO SYNC.
• The Auto Sync adjustment may take some
time to complete, depending on the image of
the computer connected to the projector.
• When the optimum image cannot be achieved
with Auto Sync adjustment, use manual
adjustments. (See page 41.)

2 Auto Power Off Function

Selectable
items
On When no input signal is detected for
more than 15 minutes, the projector will
automatically enter Standby mode.
Off The Auto Power Off function will be
disabled.
Note
• When the Auto Power Off function is set to
"On", 5 minutes before the projector enters
Standby mode, the message "Enter STANDBY
mode in X min." will appear on the screen to
indicate the remaining minutes.
46
SCR PRJ-ADJ1 PRJ2
On
On
On
On
Normal
Disable
Off
ENTER END
Description
Description
Menu operation n Page
Q PRJ-ADJ2
Pict. SIG SCR
8
Quick Start Menu
9
FUNCTION Button
0
STANDBY Mode
DLP ® Link TM
® TM
DLP Link Invert
All Reset
Lamp Timer(Life)
SEL./ADJ.

3 Auto Restart Function

Selectable
items
On If the power cord is unplugged from the
outlet or the breaker switch is turned off
when the projector is on, then the
projector automatically turns on when
the power cord is plugged into the AC
outlet or the breaker switch is turned on.
Off The projector does not turn on
automatically when the power cord is
plugged into the AC outlet or the
breaker switch is turned on.

4 Speaker Setting

Selectable
items
On The audio signal is output from the
internal speaker.
Off The audio signal is not output from the
internal speaker.

5 Fan Mode Setting

This function changes the fan rotation speed.
Selectable
items
Normal Suitable for normal environments.
High Set when using the projector at
altitudes of approximately 1,500 meters
(4,900 feet) or more.
When "Fan Mode" is set to "High", the fan rotation
speeds up, and the fan noise becomes louder.
PRJ1 PRJ-ADJ2
On
Input Search
Quick Start
Off
0 h 0 min 100%
ENTER END
Description
Description
Description
36