Cable Connector Requirements; Table 4.2 Recommended Components For Connection - Fujitsu MAU3036NC/NP Product/Maintenance Manual

4.3.3

Cable connector requirements

Table 4.2 lists the recommended components cable connection.

Table 4.2 Recommended components for connection

Applicable
Type
model
SCSI connector
NC
(CN1)
SCSI cable (CN1)
Power supply
cable (CN1)
NP
External operator
panel (CN1)
External operator
panel (CN2)
(*1) See Figure 4.22.
(1) SCSI cable
Refer to Section 1.3 "Physical Requirements" and Section 1.4 "Electrical Requirements" in the
SCSI Physical Interface Specifications.
(2) Power cable
IDDs must be star-connected to the DC power supply (one to one connection) to reduce the
influence of load variations.
(3) DC ground
The DC ground cable must always be connected to the IDD because no fasten tab dedicated to SG
is provided with the IDD. Therefore, when SG and FG are connected in the system, it is necessary
to connect SG and FG at the power supply or to connect SG of the power supply to FG of the
system.
4-20
Name
787311-1
Connector
87689-0001
DHJ-PAC68-2AN DDK
Cable socket
(closed-end type)
786090-7
UL20528-FRX-
Signal cable
68-P0.635
Cable socket housing 1-480424-0
Contact 170148-1
Cable (AWG18 to 24)
Cable socket housing A3B-12D-2C
Contact A3B-2630SCC
Cable (AWG26 to 36)
Cable socket housing FCN-723J024/2M
Contact FCN-723J-G/AM
Cable (AWG28)
Part number
Manufacturer
(Size)
Tyco Electronics
AMP
Molex
Tyco Electronics
AMP
Fujikura
Tyco Electronics
AMP
Tyco Electronics
AMP
HIROSE
ELECTRIC
HIROSE
ELECTRIC
FUJITSU
TAKAMIZAWA
FUJITSU
TAKAMIZAWA
Reference
(*1)
S1
S2
S3
S4
C141-E205