Mounting; Notes On Mounting; Figure 4.3 Idd Orientations - Fujitsu MAU3036NC/NP Product/Maintenance Manual

4.1.2

Mounting

The permissible orientations of the IDD are shown in Figure 4.3, and the tolerance of the angle is
±5° from the horizontal plane.
(a) Horizontal –1
(d) Vertical –2
4.1.3

Notes on mounting

Damage
Seals on the DE prevent the DE inside from the particle. Do not
damage or peel off labels.
4-4
(b) Horizontal –2
(e) Upright mounting –1
Direction of
gravity
Figure 4.3 IDD orientations
CAUTION
(c) Vertical –1
(f) Upright mounting –2
C141-E205