Fujitsu MPG3XXXAH Product Manual page 121

Attribute ID
The attribute ID is defined as follows:
Attribute ID
0
1
2
3
4
5
7
8
9
10
12
13 to 198
199
200
201 to 255
Status flag
Bit 0: If this bit is 1, the attribute is within the insurance range of the device when the
attribute exceeds the threshold.
If this bit is 0, the attribute is outside the insurance range of the device when the attribute
exceeds the threshold.
Bits 1 to 15: Reserved bits
Current attribute value
The current attribute value is the normalized raw attribute data. The value varies between 01h
and 64h. The closer the value gets to 01h, the higher the possibility of a failure. The device
compares the attribute values with thresholds. When the attribute values are larger than the
thresholds, the device is operating normally.
Attribute value for the worst case so far
This is the worst attribute value among the attribute values collected to date. This value
indicates the state nearest to a failure so far.
5 - 54
(Indicates unused attribute data.)
Read error rate
Throughput performance
Spin up time
Number of times the spindle motor is activated
Number of alternative sectors
Seek error rate
Seek time performance
Power-on time
Number of retries made to activate the spindle motor
Number of power-on-power-off times
(Reserved)
Ultra ATA CRC Error Rate
Write error rate
(Unique to vendor)
C141-E112-01EN
Attribute name