Appearance; Front View - Kyocera TASKalfa 2420w Hardware Operation Manual

1. 5

Appearance

1. 5. 1

Front view

14
6
No. Name
1 Main Switch
2 Original Guides
3 User Interface
4 Emergent Stop Button
5 Scanner Unit
6 Original Table
7 Engine Unit Open Lever
8 Bypass Feeder
9 Roll Deck Cover
10 Print Basket
11 Stylus
12 Print Exit Cover
13 Initial Cut Button
14 USB port
7
9
10
4
12
Function
You can turn on/off this machine.
Feed the original under the Scanner Unit along the Original
Guides.
This is a Touch Screen, and many kinds of user operation are
available.
PLEASE DO NOT push the LCD area too strong.
Press this red button when you would like to stop copying or
scanning emergently.
Read the original with this unit when you make scan or copy.
Place the original here and then feed it into the Scanner Unit
when you make scan or copy.
Push down these blue levers when you open the Engine Unit.
Feed a cut sheet paper from the Bypass Feeder.
Open here to access Initial Cut Button.
Lift up to open the Roll Deck.
A roll media can be loaded in the Roll Deck.
Receives ejected printed.
Use this to press buttons on the touch screen.
PLEASE DO NOT use any other pointed object to tap on the UI.
Can access a mis-feed print inside the Fuser Unit.
Push this button to trim the leading edge of the loaded roll
media.
Your USB flash memory storage can be installed here.
5VDC max.
3
5
13
2
1-9
7
12
1
11
7
8
2
Chapter 1 Before Use
7