Configuration Using Web Based Management (Web Browser) - Brother HL-S7000DN Settings Manual

Introduction

Configuration using Web Based Management (web browser)

Use the IPsec setting screen for Web Based Management to specify the IPsec connection conditions.
The IPsec connection conditions are comprised of three Template types: Address, Service, and IPsec, and
a maximum of 10 connection conditions can be configured.
a
Start your web browser.
b
Type "http://machine's IP address/" into your browser (where "machine's IP address" is the machine's IP
address).
 For example:
http://192.168.1.2/
c
No password is required by default. Enter a password if you have set one and press
d
Click the Network tab.
e
Click Security.
f
Click IPsec.
g
You can configure the IPsec settings from the screen below.
 Status
Select Enabled or Disabled for IPsec.
 Negotiation Mode
Select the mode for IKE Phase 1.
1
1
.
2