American Audio MCD-710 User Manual And Reference Manual page 13

Professional dual mp3 compact disc player
Table of Contents

Advertisement

GENERAL FUNCTIONS AND CONTROLS (Cont.)
sents the left channels output.
31. DRIVE 1 DIGITAL OUT - This jack sends a
digital stereo out signal. Use this connection to
create near perfect copies of your disc to a Mini
disc, CD-R, or any other recording device with a
digital input.
32. REMOTE JACK - Connect the supplied 8 pin
din cable from this jack to the remote control's
channel 1 remote connector. This will allow you to
control the player functions with the remote unit.
33. VOLTAGE SELECTOR - Because power
supplies vary from location to location a voltage
selector switch has been incorporated in the unit's
design. This switch can select a voltage input of
120V or 220V to accommodate the two major
power source. Always be sure to disconnect the
power plug before changing the voltage.
*Only dual voltage models have this switch.
34. POWER CONNECTOR - This is the main
power connection. Only use the supplied polar-
American Audio
- www.americanaudio.us - MCD-710™ Instruction Manual Page 13
©
®
ized power cord. Use of any other power may
result in sever damage to the unit. Be sure the
local power matches the unit's required power.
35. DRIVE 2 AUDIO OUT R & L - These jacks
send a left and right analog mono output signal.
Use these jacks to send standard audio to a
mixer or receiver. The red colored jack represents
the right channel output and white jack repre-
sents the left channels output.
36. DRIVE 2 DIGITAL OUT - This jack sends a
digital stereo out signal. Use this connection to
create near perfect copies of your disc to a Mini
disc, CD-R, or any other recording device with a
digital input.

Advertisement

Table of Contents
loading

Table of Contents