Table of Contents
Advertisement
Intel Rapid Start Technology [Disabled]
Allows you to enable or disable Intel Rapid Start Technology. Configuration options: [Enabled]
[Disabled]
The following items appear only when you set the Intel Rapid Start Technology to
[Enabled].
Entry on S3 RTC Wake [Enabled]
The system automatically wakes up and set to Rapid Start Technology S4 mode.
Configuration options: [Enabled] [Disabled
Active Page Threshold Support [Enabled]
The system automatically goes into sleep mode when the partition size is not enough
for the Intel
[Disabled]
Ensure that the caching partition size is larger than the total memory size.
Hybrid Hard Disk Support [Disabled]
Allows you to enable or disable the hybrid hard disk support. Configuration options:
[Enabled] [Disabled]
Intel Smart Connect Technology
ISCT Support [Disabled]
Allow you to enable or disable the Intel
options: [Enabled] [Disabled]
3-26
Entry After [0]
Allows you to set the RTC wake-up timer at S3 entry. The time ranges from
0 minute (immediately) to 120 minutes.
Rapid Start Technology to work. Configuration options: [Enabled]
®
Active Memory Threshold [0]
This item supports Intel Rapid Storage Technology when the partition size
is greater than the Active Page Threshold size. When set to zero (0), it will
go to Auto mode and checks if the partition size is enough at S3 entry.
Smart Connect Technology. Configuration
®
Chapter 3: BIOS setup
Hide quick links:
Advertisement
Table of Contents
