Honeywell HCM6011I - QuietCare Console Humidifer Owner's Manual page 7

EasySet Control Operation (Model HCM-6013i) (Continued)
™
• To turn your humidifier OFF simply press the Power button again.
S T E P 2 : O U T P U T / F A N S P E E D C O N T R O L
Your unit has three output levels/fan speeds:
HIGH: For fast humidifying
MED: For everyday moisture control
LOW: For minimum operation (ideal for nighttime use)
• Push the up button (+) to increase output level and push the
down button ( ) to decrease output level. The LED's will
illuminate to reflect which speed you have selected (Fig. 8).
NOTE: Turn the humidifier off if the humidity level fe els too
moist or you notice condensation forming on the walls.
S T E P 3 : S E T H U M I D I T Y
• Set your desired humidity anywhere between 35% and 55%.
• Push the up button (+) to increase desired humidity and push the
down button ( ) to decrease desired humidity. The LED's will
illuminate to reflect which desired humidity level you have
selected (Fig. 9).
For example: If you set your humidity at 40%, the 35% and 40%
LED's will be illuminated.
• Once you have set your desired humidity, the unit will operate
under this setting until the unit is turned off or your selected
humidity is reached.
• When the desired room humidity has been reached the fan
will automatically shut off. (The humidity LED's will remain
illuminated)
• The fan will turn back on when your room decreases beyond your set level.
NOTE: Your room humidity can often fluctuate. It is normal for your unit to turn itself on and off
throughout the day as it is monitoring your changing environment.
To turn your unit off and then back on and select your desired output setting (see Step 2).
Fig. 8
Fig. 9
7