Honeywell HCM6011I - QuietCare Console Humidifer Owner's Manual page 6

Manual Control Operation (Models HCM-6009, HCM-6009-TGT, HCM-6011, HCM-6011WW) (Continued)
H U M I D I S T A T
The humidistat allows you to adjust and select the humidity level
to your personal preference. Your humidifier will turn on and off
throughout the day and night to maintain the desired humidity level
you have selected.
H O W T O S E T T H E H U M I D I S T A T
First, turn the humidifier on and select your output/speed level.
Set the humidistat on High by turning the knob clockwise
end (Fig. 5).
• Let the humidifier run on high for a least one hour or until your
room has reached a comfortable humidity level.
• At this point, slowly turn your Humidistat knob counter-clockwise
the Desired Humidity light illuminates (Fig. 6).
• Now that your Humidistat knob is set, the humidifier will automatically turn back on when your room
drops below your comfort setting and will automatically turn off again when the setting is reached.
NOTE: If the humidifier fan will not start or restart when you select a fan speed, the Advanced Mist
Humidistat may be set too low. Turn the dial clockwise
will turn Off when the unit is producing moisture. When the Desired Humidity light turns ON, you have
reached optimal humidity.
EasySet Control Operation (Model HCM-6013i)
™
P O W E R
CAUTION: DO NOT PLUG IN THE HUMIDIFIER WITH WET
HANDS AS AN ELECTRICAL SHOCK COULD OCCUR.
• With the power OFF, plug the filled
humidifier into a polarized 120V outlet.
DO NOT FORCE THE POLARIZED PLUG INTO THE OUTLET; it will
only fit one way.
S T E P 1 : P O W E R
• Press the Power button to start the humidifier. Your humidifier
will automatically start on High power, Continuous Mode (Fig. 7).
6
Fig. 6
to the
Desired
Humidity Light
(Illuminated)
until the humidifier shuts off and
to the end (Fig. 5 ). The Desired Humidity light
Fig. 7
Humidistat
Control
Power
Button
Power Light
(Illuminated)
™
Fan Speed
Control