When:
if there are already 50 ticked items when you attempt to add a tick in the
Destination history.
What to do:
remove the tick from some destinations as appropriate.
When:
if a listing in the Destination history already has the same name.
What to do:
choose another name.
When:
if there is no point of interest in the specified category in the area.
What to do:
choose another category or drive on a little before trying again.
When:
if you try to overlay more than two point of interest categories on the map.
What to do:
remove another category from the map.
When:
the destination is not available on the map disc you are using.
What to do:
insert a disc that covers your choice of destination.
When:
if you enter or speak the wrong password.
What to do:
use the correct password.
When:
in the case of a system failure.
What to do:
note down the error code displayed on the screen, turn off the power, and then
contact your nearest Pioneer service facility.
When:
in the case of system failure.
What to do:
do as instructed on the display.