Self-Diagnosis Display - Sony Cyber-shot DSC-RX100M2 User Manual

Cyber-shot User Guide
Before Use
Operating the camera
Shooting
Viewing
Useful shooting functions
Useful viewing functions
Changing settings
Viewing images on a TV
Using with your computer
Printing
Troubleshooting
Precautions / About this camera
Contents list
Top page > Troubleshooting > Warning indicators and messages > Self-diagnosis display

Self-diagnosis display

If a code starting with a letter of the alphabet appears, the self-diagnosis function on the camera is
working. The last two digits (indicated by
If you cannot solve the problem even after trying the following corrective actions a few times, the camera
may need repair.
Contact your dealer or local authorized service facility.
C:32:
There is trouble with the camera's hardware. Turn the power off and on again.
C:13:
The camera cannot read or write data on the memory card. Try turning off and on the camera again,
or taking out and inserting the memory card several times.
An unformatted memory card is inserted. Format the memory card.
The inserted memory card cannot be used with the camera, or the data is damaged. Insert a new
memory card.
E:61:
E:62:
E:91:
A camera malfunction has occurred. Initialize the camera, then turn the power on again.
E:94:
There is a malfunction when writing or deleting data. Repair is required. Contact your dealer or local
authorized service facility. Be prepared to give all numbers in the error code beginning from the E.
Copyright 2013 Sony Corporation
245
) will differ depending on the state of the camera.
[Details]
Search Print
[Details]
Back to top