Electrolux EIDW6405HT - Fully Integrated Dishwasher Service Manual page 71

Electrolux
EFS – Dishwashing Systems Platform
Electrolux Professional
LU700A / WTU40A
CY2
Cycle 2 parameters family.
Ln2
Sh2
CY3
Cycle 3 parameters family.
Ln3
6. Switch OFF and then switch ON the machine.
FL620WS / LV6WS / WT38WS
1. Switch OFF and then switch ON the machine.
CFG
2. Enter into CFG parameter family and set the following parameters.
tYP
boi
doo
dFL
trc
b_t
btF
LES
UI
rE
ALr
3. Modify Communication and HACCP parameters:
HCP
Enter into
sEr
4. Switch OFF and then switch ON the machine.
DOC. NO. 5956.446.06
1
Long Wash Phase [min]
10
Short Wash Phase [s]
4
Long Wash Phase [min]
0
Undercounter like working cycles.
0
Atmospheric boiler.
2
Front loading.
3
Default values for Undercounter models.
1
SOFT START ENABLED.
1
Tank heater works only if boiler temperature reached.
75
Enable filling tank by means of rinsing cycles.
0
Detergent level switches not enabled.
8
ACTIVE function disabled (up to version 3.11 set to
0
Regeneration cycle disabled (only for dishwashers with non-continuous water softener).
1
Alarms enabled.
HCP
parameter family and set the following parameters.
9
Dishwasher with incorporated continuous water softener.
©Copyright 2005 by Electrolux Professional
Electronic Dishwasher
SERVICE MANUAL
0
)
Prog. 047
Prog. 048
.
P.71/88