Electrolux EIDW6405HT - Fully Integrated Dishwasher Service Manual page 45

Electrolux
EFS – Dishwashing Systems Platform
Electrolux Professional
LS5 / WT 4 PRES MONO
1. Switch OFF and then switch ON the machine.
CFG
2. Enter into CFG parameter family and set the following parameters.
tYP
boi
doo
dFL
trc
b_t
btF
LES
UI
rE
ALr
3. Switch OFF and then switch ON the machine.
4. Modify Factory parameters:
FAC
Enter into FAC parameter family.
bt° C
bAJ
bSt
5. Modify the cycle parameters:
CY3
Cycle 3 parameters family.
Ln3
Sh3
6. Switch OFF and then switch ON the machine.
7. Modify Detergent dosage:
GEn
Enter into GEn parameter family.
dIn 165
rIn
dEt 182
rAi
8. Switch OFF and then switch ON the machine.
DOC. NO. 5956.446.06
0
Hood Type like working cycles.
1
Pressure boiler.
2
Front loading door type.
3
Default values for Undercounter models.
0
(for this appliance SOFT START is NOT possible).
1
Tank heater works only if boiler temperature reached.
0
The tank is filled into the traditional way.
0
Detergent level switches not enabled.
15
Select user interface without display (up to version 3.11 set to
0
Regeneration cycle disabled.
0
ALARMS NOT ENABLED.
82
Boiler Temperature Threshold.
3
Boiler Temperature Adjust.
2
Booster Function.
1
Long Wash Phase [min]
40
Short Wash Phase [s]
Initial Detergent Dosage.
0
Initial Rinse Aid Dosage.
Detergent dispenser works when LOAD SOLENOID VALVE in activated.
61
Rinse Aid dispenser works when LOAD SOLENOID VALVE in activated.
©Copyright 2005 by Electrolux Professional
Electronic Dishwasher
SERVICE MANUAL
Prog. 021
7
.
)
P.45/88