Electrolux EIDW6405HT - Fully Integrated Dishwasher Service Manual page 46

Electrolux
EFS – Dishwashing Systems Platform
Electrolux Professional
LB5G/WT4G
1. Switch OFF and then switch ON the machine.
CFG
2. Enter into CFG parameter family and set the following parameters.
tYP
boi
doo
dFL
trc
b_t
btF
LES
UI
rE
ALr
3. Switch OFF and then switch ON the machine.
4. Modify Factory parameters:
FAC
Enter into FAC parameter family.
bt° C
bAJ
bSt
5. Modify the cycle parameters:
CY3
Cycle 3 parameters family.
Ln3
Sh3
6. Switch OFF and then switch ON the machine.
7. Modify Detergent dosage:
GEn
Enter into GEn parameter family.
dIn
rIn
8. Switch OFF and then switch ON the machine.
ECOTEMP5 EAG
1. Switch OFF and then switch ON the machine.
CFG
2. Enter into CFG parameter family and set the following parameters.
tYP
boi
doo
dFL
trc
b_t
btF
DOC. NO. 5956.446.06
0
Hood Type like working cycles.
0
Atmospheric boiler.
2
Front loading door type.
3
Default values for Undercounter models.
0
(for this appliance SOFT START is NOT possible).
1
Tank heater works only if boiler temperature reached.
0
The tank is filled into the traditional way.
0
Detergent level switches not enabled.
15
Select user interface for LS5 (up to version 3.11 set to
0
Regeneration cycle disabled.
1
ALARMS ENABLED.
85
Boiler Temperature Threshold.
0
Boiler Temperature Adjust.
2
Booster Function.
1
Long Wash Phase [min]
40
Short Wash Phase [s]
70
Initial Detergent Dosage [s].
5
Initial Rinse Aid Dosage [s].
0
Hood Type like working cycles.
0
Atmospheric boiler.
2
Front loading door type.
3
Default values for Undercounter models.
1
SOFT START ENABLED.
1
Tank heater works only if boiler temperature reached.
75
Enable filling tank by means of rinsing cycles.
©Copyright 2005 by Electrolux Professional
Electronic Dishwasher
SERVICE MANUAL
7
Prog. 022
.
)
Prog. 023
P.46/88