Front Bezel - HP 1155 Maintenance And Service Manual

Front Bezel

Description
Front bezel
The front bezel is located on the front of the computer and is secured to the display panel bracket
with 6 screws. You can remove the bezel without removing most of the main computer components,
which the following procedure demonstrates.
To remove the front bezel while removing the minimal number of components:
1. Prepare the computer for disassembly (see
on page
2. Remove the rear cover (see
3. Remove the foot assembly (see
4. Remove the security bracket (see
5. Remove the side I/O cover (see
6. Remove the 6 screws that secure the bezel to the computer.
7. Lift the computer from the bezel.
To install the front bezel, reverse the removal procedures.
37).
Rear Cover on page
Preparing to Disassemble the Computer
38).
Foot assembly on page
Security Bracket on page
Side I/O Cover on page
Spare part number
729648-001
41).
74).
65).
Front Bezel 75