Adobe 65008009 - After Effects CS4 Using Manual page 739

Last updated 12/21/2009
4 Choose Composition > Add To Render Queue.
In the Render Queue panel, next to Render Settings, choose the appropriate preset from the menu. For example, if
5
you're converting to DV footage, select DV Settings from the menu.
6 In the Render Queue panel, next to Output Module, choose the appropriate output module preset from the menu,
or choose Custom to enter custom settings. For example, if you're converting to DV PAL, choose the D1/DV-PAL
output module preset with the audio sampling rate that you require.
Click the name of the output module preset that you chose in step 6 to select additional Format Options.
7
8 Specify a name and destination for the output file using the controls to the right of the Output To heading in the
Render Queue panel. (See
Click the Render button to render your movie.
9
More Help topics
"Output modules and output module
"Render and export with the Render Queue
Convert DV footage from PAL to NTSC using pulldown
Because After Effects can easily convert film (24 fps) to video (29.97 fps) using 3:2 pulldown, you can perform a clean
PAL-to-NTSC transfer by setting up 25-fps PAL video to act like 24-fps film. This lets you apply 3:2 pulldown to the
footage when converting to 29.97 fps. This technique works especially well for progressive (noninterlaced) PAL video.
Create a new composition with the DV NTSC or DV NTSC Widescreen preset.
1
2 Import your DV PAL footage into the new composition.
Select the layer with the DV PAL footage, and choose Layer > Transform > Fit To Comp Width (or Fit To Comp
3
Height).
4 Do one of the following:
• To preserve audio synchronization but slightly lower the pitch, choose Layer > Time > Time Stretch, and then enter
95.904 in the Stretch Factor box.
• To preserve audio pitch but not synchronization, or for clips without audio, right-click (Windows) or Control-click
(Mac OS) the footage item in the Project panel, select Interpret Footage > Main, select Conform To Frame Rate,
and then enter 23.976 in the Conform To Frame Rate box.
Choose Composition > Add To Render Queue.
5
6 Choose Custom from the Render Settings menu.
In the Render Settings pane, enable Field Rendering (choose the field order required by your output type), select
7
any option from the 3:2 Pulldown menu, and then click OK.
Choose the output type from the Render Queue Output Module menu (for example, Microsoft DV NTSC 32 kHz).
8
Specify a name and destination for the output file using the controls to the right of the Output To heading in the
9
Render Queue panel. (See
Click the Render button to render your movie.
10
"Specify filenames and locations for rendered
settings" on page 700
panel" on page 691
"Specify filenames and locations for rendered
USING AFTER EFFECTS CS4
Rendering and exporting
output" on page 696.)
output" on page 696.)
733