Displaying The Text; Changer (Optional); Controlling Cd Changer (Optional) - Alpine CDA9857 Owner's Manual

Displaying the Text

You can display the tag information of a song in the iPod.
Press TITLE.
Each press changes the display.
1
ARTIST NAME*
SONG NAME*
ELAPSED TIME
*2
1
ALBUM NAME * SONG NAME*
1
SONG NAME* CALENDAR/CLOCK
(Blank)
SONG NAME*
ELAPSED TIME
(Blank)
1
* TAG information
If there is no tag information, nothing will be displayed.
2
* If "Text Scroll Auto" is set in "Scroll Setting (Text Scroll)" (page 20),
the display cannot be switched by pressing TITLE. The display
contents switch alternately.
• When the Scroll Setting (page 20) is set to "Text Scroll Manual,"
press and hold TITLE for at least 2 seconds to scroll the tag
information only once.
• Only alphanumeric characters (ASCII) can be displayed.
• If the artist, album or song name, created in iTunes, has too many
characters, songs may not be played back when connected to the
adapter. Therefore, a maximum of 250 characters is recommended.
The maximum number of characters for the head unit is 64 (64 byte).
• Some characters may not be correctly displayed.
• "NO SUPPORT" is displayed when text information is not
compatible with the CDA-9857R/CDA-9856R.
*2
1
1
SONG NAME*
1
1
Changer
(Optional)
SOURCE/POWER BAND
FUNC.
/

Controlling CD Changer (Optional)

An optional 6-disc or 12-disc CD Changer may be connected to this unit
if it is Ai-NET compatible. With a CD Changer connected to the Ai-
NET input of this unit, the CD Changer will be controllable from this
unit.
Using the KCA-400C (Multi-Changer Switching device) or the KCA-
410C (Versatile Link Terminal) multiple changers can be controlled by
this unit.
See "Multi-Changer Selection" on page 24 for selecting the CD
Changers.
• The controls on this unit for CD Changer operation are operative
only when a CD Changer is connected.
• The DVD changer (optional) is controllable from this unit as well as
the CD changer.
1
Press SOURCE/POWER to activate the CHANGER
mode.
The display shows the disc number and track number.
• The source indicator varies depending on the connected source.
• Press BAND to switch the Disc mode in the Changer mode.
2
Press FUNC. to activate the disc selection mode.
Disc Select Mode
(Disc No.1~6)
RPT/M.I.X. Mode
3
Press the disc select buttons (1 through 6)
corresponding to one of the discs loaded in the CD
Changer.
The selected disc number appears in the display and CD
playback starts.
• After selecting the desired disc, you can operate in the same way as
for the CD player of this unit.
For details, please see the CD/MP3/WMA section.
* When a 12-disc CD changer is connected.
Select buttons
(1 through 6)
Disc Select Mode*
(Disc No.7~12)
Disc Select Mode
(Disc No.1~6)
23
-EN