13. Gently slide the Mini-Card antenna cables out through the slot on the computer base.
14. Lift the display assembly off the computer.
1
display assembly
3
display cable
Replacing the Display Assembly
1. Follow the instructions in
Before You
2. Slide the antenna cables in through the slot on the computer base.
3. Place the display assembly in position and replace the four screws that secure the display assembly to the computer base.
4. Connect the display cable to the connector on the system board.
5. Connect the touch-screen board cable to the connector on the system board.
6. Turn the computer over and route the Mini-Card antenna cables through the routing guides on the computer base.
7. Connect the Mini-Card antenna cables to the Mini-Card(s) (see
8. Replace the palm-rest assembly (see
9. Replace the keyboard (see
10. Replace the center-control cover (see
11. Replace the battery pack (see
12. Replace the base cover (see
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Back to Contents Page
2
screws (4)
4
touch-screen board cable
Begin.
Replacing the Palm-Rest
Replacing the
Keyboard).
Replacing the Center-Control
Replacing the Battery
Pack).
Replacing the Base
Cover).
Replacing the
Mini-Card(s)).
Assembly).
Cover).