Signal Segment And Power Supply Segment; Connector Specifications For Host System; Figure 3.8 Power Supply Pins (Cn1) - Fujitsu MJA2500BH - Mobile 500 GB Hard Drive Product/Maintenance Manual

Installation Conditions

3.3.2 Signal segment and power supply segment

Figure 3.8 shows each segment of the SATA interface connector and pin numbers.
P1 pins in the power

3.3.3 Connector specifications for host system

The connector of host system for mating with the disk drive must be compliant
with Serial-ATA Revision 2.6 specification. For detail of requirements about
SATA interface connector, refer to the "Serial-ATA Revision 2.6."
The connection reliability per number of insertion/extractions varies
with the condition of the connection with the host system.
Therefore, we recommend that the customer evaluate the connector
on the customer's system and select it from the connectors
complying with the Serial ATA Revision 2.6 specification.
3-10
Power supply
Signal segment
segment
S1 pins in the signal
supply segment

Figure 3.8 Power supply pins (CN1)

View from the
connector side
View from the
PCA side
segment
C141-E293