Safety Information And Specifications; Tools Needed - RocketFish RF-TVML70 Assembly Manual

Tv wall mount
Hide thumbs Also See for RF-TVML70:
Table of Contents

Advertisement

Safety information and specifications

IMPORTANT SAFETY INSTRUCTIONS -
SAVE THESE INSTRUCTIONS
CAUTION: Do not use this product for
any purpose not explicitly specified by
Rocketfish.
Improper installation may cause
property damage or personal injury. If
you do not understand these directions, or have doubts
about the safety of the installation, contact Customer
Service or call a qualified contractor. Rocketfish is not
responsible for damage or injury caused by incorrect
installation or use.
The included hardware is designed for use on vertical walls
constructed of wood studs or solid concrete. A wood stud
wall is defined as consisting of a minimum of 2x4 wooden
studs (2" wide by 4" deep) with a maximum of 5/8"
drywall. The included hardware is not designed for use with metal studs or cinderblock walls. If you're uncertain
about the construction of your wall, then please consult a qualified contractor or installer for assistance. For a
safe installation, the wall you are mounting to must support 4 times the weight of the total load. If not, then the
surface must be reinforced to meet this standard. The installer is responsible for verifying that the wall structure
and hardware used in any installation method will safely support the total load.
The weight of your TV must not exceed 70 lbs. (31.8 kg). Rocketfish recommends that the wall be capable of
supporting five times the weight of your TV and wall mount combined, or approximately 350 lbs. (159 kg).
This product contains small items that could be a choking hazard if swallowed. Keep these items away from
young children!

Tools needed

You will need the following tools to assemble your new TV wall mount:
Edge-to-edge
stud finder
Measuring tape
2
Pencil
7/32" (5.5 mm) and 1/2"
(13 mm) wood drill bit for
for wood stud wall
OR
3/8" (9.5 mm) masonry
drill bit (concrete only)
Need help? Call 800-620-2790
RF-TVML70 TV Wall Mount
Maximum TV weight: 70 lbs. (31.8 kg)
Minimum TV weight: 45 lbs. (20.4 kg)
Maximum TV Screen size: 70 in. diagonal
Overall dimensions (W × H ):
10.5 x 23.8 in. (26.7 x 60.3 cm)
Wall-mount weight: 28 lbs. (12.7 kg)
We're here for you
www.rocketfishproducts.com
For customer service, call:
800-620-2790 (U.S./Canada markets)
Level
Phillips screwdriver
Socket wrench with
1/2" (13 mm) socket or
adjustable wrench
Drill
Hammer
Tape

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents