FujiFilm FinePix S3 Pro Owner's Manual page 60

CONNECTING THE CAMERA DIRECTLY TO THE PRINTER —
PictBridge FUNCTION
5
1 0 2 0
ＰＩＣＴＢＲＩＤＧＥ ＰＩＣＴＢＲＩＤＧＥ
ＰＲＩＮＴ ＷＩＴＨ ＰＲＩＮＴ ＷＩＴＨ ＤＡＴＥ ＤＡＴＥ
ＰＲＩＮＴ ＰＲＩＮＴ ＷＩＴＨＯＵＴ ＷＩＴＨＯＵＴ ＤＡＴＥ ＤＡＴＥ
ＰＲＩＮＴ ＰＲＩＮＴ ＤＰＯＦ ＤＰＯＦ
ＳＥＴ ＳＥＴ
6
ＰＲＩＮＴ ＤＰＯＦ ＰＲＩＮＴ ＤＰＯＦ
ＴＯＴＡＬ／ １９ＳＨＥＥＴＳ ＴＯＴＡＬ／ １９ＳＨＥＥＴＳ
ＰＲＩＮＴ ＤＰＯＦ ＯＫ？ ＰＲＩＮＴ ＤＰＯＦ ＯＫ？
ＣＡＮＣＥＬ ＣＡＮＣＥＬ ＹＥＳ ＹＥＳ
ＰＲＩＮＴ ＤＰＯＦ ＰＲＩＮＴ ＤＰＯＦ
ＰＲＩＮＴＩＮＧ ＰＲＩＮＴＩＮＧ
１／ １９ＳＨＥＥＴＳ １／ １９ＳＨＥＥＴＳ
ＣＡＮＣＥＬ ＣＡＮＣＥＬ
Specifying images for printing without using DPOF ( single-frame printing )
1
0 1 3 3 0
2 0
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
1 2 3 4 5
ＢＥＥＰ ：ＬＯＷ ＢＥＥＰ ：ＬＯＷ
ＤＡＴＥ／ＴＩＭＥ ：ＳＥＴ ＤＡＴＥ／ＴＩＭＥ ：ＳＥＴ
ＵＳＢ ＭＯＤＥ ＵＳＢ ＭＯＤＥ
１３９４ ＭＯＤＥ ： １３９４ ＭＯＤＥ ：
ＣＡＮＣＥＬ ＣＡＮＣＥＬ ＳＥＴ ＳＥＴ
118
1 Press "a" or "b" to select " u PRINT DPOF".
2 Press the "MENU/OK" button.
t
●
!
When " " appears, the DPOF settings are not
specified.
●
!
To use DPOF printing, the DPOF settings must be specified
on FinePix S3 Pro beforehand (➡P.94).
●
!
Even when "WITH DATE" is specified in the DPOF settings,
the date is not inserted on printers that do not support date
printing.
Press the "MENU/OK" button to download the data
to the printer and print the frames specified in the
DPOF settings.
Press the "BACK" button to return to step 5 .
●
!
Press the "BACK" button to cancel the printing. Depending on
the printer, the printing may not be canceled immediately or
printing may stop midway through. When printing stops
midway, briefly turn the camera off and then on again.
1 Set the Power switch to "ON".
2 Select " $ " in "USB MODE" in the "SET-UP"
menu (➡P.101).
3 Set the Power switch to "OFF" to turn the
camera off.
●
!
Do not connect to a PC when the USB mode setting is set to
" $ ". See P.137 if you connect to PC by mistake.
2
USB
socket
(mini-B)
DC IN 5V socket
3
4
ＣＨＥＣＫＩＮＧ ＵＳＢ ＣＨＥＣＫＩＮＧ ＵＳＢ
5
1 0 2 0
ＰＩＣＴＢＲＩＤＧＥ ＰＩＣＴＢＲＩＤＧＥ
ＰＲＩＮＴ ＷＩＴＨ ＤＡＴＥ ＰＲＩＮＴ ＷＩＴＨ ＤＡＴＥ
ＰＲＩＮＴ ＷＩＴＨＯＵＴ ＤＡＴＥ ＰＲＩＮＴ ＷＩＴＨＯＵＴ ＤＡＴＥ
ＰＲＩＮＴ ＤＰＯＦ ＰＲＩＮＴ ＤＰＯＦ
ＳＥＴ ＳＥＴ
1 Connect the camera to the printer using the USB
cable (mini-B).
2 Turn the printer on.
●
!
The camera cannot be used to specify printer settings such
as the paper size and print quality.
●
!
Please connect the AC Power Adapter AC-5VX (sold
separately) to your camera.
●
!
Use a media that was formatted on the camera.
Set the Power switch to "ON".
$
" CHECKING USB" appears on the rear
display panel for a few moments and then the
menu screen appears on the LCD monitor.
●
!
If the menu does not appear, check whether the USB mode
" ".
$
setting is
●
!
Depending on the printer, some functions are disabled.
1 Press "a" or "b" to select "PRINT WITH DATE"
or "PRINT WITHOUT DATE". If "PRINT WITH
DATE" is selected, the date is imprinted on your
prints.
2 Press the "MENU/OK" button.
●
!
"PRINT WITH DATE" is not available when the camera is
connected to a printer that does not support date printing.
Continued
6
119