FujiFilm FinePix REAL 3D W1 Owner's Manual page 67

3 Cautions
• Use only memory cards that have been formatted
in the camera and contain pictures taken with the
camera. If a memory card containing a large number
of images is inserted, there may be a delay before
FinePixViewer starts and FinePixViewer may be un-
able to import or save images. Use a memory card
reader to transfer pictures.
• Make sure the indicator lamp is out before turning the
camera off or disconnecting the USB cable. Failure to
observe this precaution could result in loss of data or
damage to internal memory or the memory card.
• Disconnect the camera before inserting or removing
memory cards.
• In some cases, it may not be possible to access pic-
tures saved to a network server using FinePixViewer
in the same way as on a standalone computer.
• The user bears all applicable fees charged by the
phone company or Internet service provider when
using services that require an Internet connection.
Viewing Pictures on a Computer
Disconnecting the Camera
After confi rming that the indicator lamp is out, follow
the on-screen instructions to turn the camera off and
disconnect the USB cable.
Updating FinePixViewer
The latest version of FinePixViewer can be download-
ed from http://www.fujifilm.com/.
Uninstalling FinePixViewer
Only uninstall FinePixViewer before reinstalling the
software or when it is no longer required. After quit-
ting FinePixViewer and disconnecting the camera,
open the control panel and use "Programs and Fea-
tures" (Windows Vista) or "Add or Remove Programs"
(Windows XP) to uninstall FinePixViewer, FinePix
Resource, and FinePix Studio. Under Windows, one
or more confi rmation dialogs may be displayed; read
the contents carefully before clicking OK.
53