FujiFilm FinePix REAL 3D W1 Owner's Manual page 115

Warning Warning
PRESS AND HOLD An attempt was made to choose a fl ash mode
THE DISP BUTTON TO or adjust the volume with the camera in silent
DEACTIVATE SILENT MODE mode.
A connection error occurred while pictures
COMMUNICATION ERROR were being printed or copied to a computer or
other device.
PRINTER ERROR
Printer out of paper or ink, or other printer er-
ror.
PRINTER ERROR
RESUME?
An attempt was made to print a movie, a pic-
CAN NOT BE PRINTED ture not created with the camera, or a picture
in a format not supported by the printer.
Description Description
Warning Messages and Displays
Solution Solution
Exit silent mode before choosing a fl ash mode or ad-
justing the volume.
Confi rm that the device is turned on and that the USB
cable is connected.
Check printer (see printer manual for details). To resume
printing, turn the printer off and then turn it back on.
Check printer (see printer manual for details). If printing
does not resume automatically, press MENU/OK to resume.
Movies and some pictures created with other devices
can not be printed. If the picture was created with the
camera, check the printer manual to confi rm that the
printer supports the JFIF-JPEG or Exif-JPEG format. If it
does not, the pictures can not be printed.
101