Adjusting The Lcd Panel Angle; Inserting And Ejecting A Disc; Inserting A Disc (For Avic-F30Bt) - Pioneer AVIC-F30BT Operation Manual

Basic operation
Removing the front panel
p The navigation system cannot be operated
while the front panel is removed from the
navigation system.
1 Press and hold the Detach button, and
slide it down.
When you release your finger, the bottom of
the front panel separates slightly from the na-
vigation system.
2 Gently grip the bottom of the front
panel and slowly pull it outward.
Front panel
Attaching the front panel
1 Slide the front panel all the way into
the navigation system.
Make sure the front panel is securely con-
nected to the mounting hooks of the naviga-
tion system.
2 Push the lower part of the front panel
until you hear a click.
If you fail to successfully attach the front panel
to the navigation system, try again but be care-
ful not to force it as the panel could be
damaged.

Adjusting the LCD panel angle

p This function is available for AVIC-F30BT
only.
WARNING
When opening, closing and adjusting the angle
of the LCD panel, be careful not to get your fin-
gers caught.
CAUTION
Do not open or close the LCD panel by force. This
may cause malfunction.
1 Press the h button.
The "Monitor Setup" screen appears.
2 Touch or to adjust the angle.
3 Touch .
p The adjusted angle of the LCD panel will be
memorised and the LCD panel will automa-
tically return to that angle the next time the
LCD panel is opened or closed.

Inserting and ejecting a disc

Inserting a disc (for AVIC-F30BT)

WARNING
! When opening, closing and adjusting the
angle of the LCD panel, be careful not to get
your fingers caught.
! Do not use with the LCD panel left open. If
LCD panel is left open, it may result in injury
in the event of an accident.
Chapter
02
15
Engb