Pioneer SC-1523-K Operating Instructions Manual page 39

03
MULTI-ZONE setup using speaker terminals (ZONE 2)
Either the surround back or the front wide speaker terminals can be used as the speaker terminals for ZONE 2.
For details, see Determining the speakers' application
1 Connect a pair of speakers to the surround back or front wide speaker terminals.
2 Connect a TV monitor to the VIDEO ZONE 2 OUT jack on this receiver.
! COMPONENT VIDEO ZONE 2 OUT can be used to output clear images.
! The GUI screen is not displayed if only the COMPONENT VIDEO ZONE 2 OUT jack is connected.
To use the front wide speaker terminals for ZONE 2:
Sub zone (ZONE 2)
2
VIDEO IN
L R
1
To use the surround back speaker terminals for ZONE 2:
Sub zone (ZONE 2)
2
VIDEO IN
L R
1
on page 20.
Main zone
ZONE 2
OUT
FRONT WIDE / B
R L
FRONT WIDE /
ZONE 2 R
OUT
Main zone
ZONE 2
OUT
FRONT WIDE / B
R L
SURROUND BACK
ZONE 2 R
OUT
Secondary MULTI-ZONE setup (ZONE 3)
%
Connect a separate amplifier to the AUDIO ZONE 3 OUT jacks on this receiver.
You should have a pair of speakers attached to the sub zone amplifier as shown in the following illustration.
Sub zone (ZONE 3)
AUDIO IN
R L
B
L
Secondary MULTI-ZONE setup using speaker terminals (ZONE 3)
You must select 5.1ch + ZONE 2+3 in
% Connect a pair of speakers to the front wide speaker terminals.
You should have a pair of speakers attached to the sub zone amplifier as shown in the following illustration.
Sub zone (ZONE 3)
L R
A
L
(Single)
1
39
Connecting your equipment
Main zone
ZONE 3
OUT
ZONE 3
OUT
Speaker system setting on page 98 to use this setup.
Main zone
FRONT WIDE / B
R L
FRONT WIDE / B
R L