Media Bridge Maintenance & Monitoring; Reset Your Media Bridge To Factory Defaults - TRENDnet TEW-800MB User Manual

TRENDnet User's Guide
3. Antenna orientation can also have a large impact on your wireless signal. Use
the wireless adapter or the media bridge's site survey tool to determine the
best antenna orientation for your wireless devices.
4. Interference from devices that produce RF (radio frequency) noise can also
impact your signal. Position your wireless devices away from anything that
generates RF noise, such as microwaves, radios and baby monitors.
If possible, upgrade wireless network interfaces (such as wireless cards in computers)
from older wireless standards to 802.11n or 802.11ac. If a wirelessly networked device
uses an older standard, the performance of the entire wireless network may be slower.
If you are still experiencing low or no signal consider repositioning the wireless devices,
installing additional access points or wireless extenders.
© Copyright 2013 TRENDnet. All Rights Reserved.
Media Bridge Maintenance & Monitoring

Reset your Media Bridge to factory defaults

Administrator > Settings Management
You may want to reset your media bridge to factory defaults if you are encountering
difficulties with your router and have attempted all other troubleshooting. Before you
reset your media bridge to defaults, if possible, you should backup your media bridge
configuration first; restore configuration after firm upgrade or reset, see
restore your media bridge configuration
There are two methods that can be used to reset your media bridge to factory defaults.
• Reset Button – Located on the bottom panel of your media bridge, see
Hardware Features" on page 4. Use this method if you are encountering
difficulties with accessing your router management page.
OR
• Settings Management Page
1. Log into your media bridge management page (see
6).
2. Click on Administrator and click on Settings Management.
3. Under Load Factory Default, click Load Default. When prompted to confirm this
action, click OK.
4. To restore your media bridge configuration: refer to the next page.
TEW-800MB
"Backup and
settings" on page 20.
"Installation and Login" on page
"Product
19