TRENDnet TEW-800MB User Manual page 17

TRENDnet User's Guide
Selecting WEP-OPEN, WEP-SHARED:
If selecting WEP (Wired Equivalent Privacy), please review the WEP settings to configure
and click Apply to save the changes.
Note: WPS functionality is not available when using WEP.
In the Security Mode drop-down list, select WEP-OPEN or WEP-SHARED.
Note: It is recommended to use WEP-OPEN because it is known to be more secure than
Shared Key.
• Current Network Key - You can define 1 key.
• Network Key 1
This is where you enter the WEP key needed for a computer to
o
connect to the router wirelessly
You can define 1 passwords or 1 key.
o
When connecting to the router, the TEW-800MB must match both the
o
password and the Key number.
WEP Key Format HEX
Character set 0-9 & A-F, a-f only
64-bit key length 10 characters
128-bit key length
26 characters
Note: It is recommended to use 128-bit format because it is more secure to use a
key that consists of more characters.
© Copyright 2013 TRENDnet. All Rights Reserved.
ASCII
Alphanumeric (a,b,C,?,*, /,1,2, etc.)
5 characters
13 characters
• Click here to display - Typically, the password characters are masked for
security purposes. This link displays actual characters of the currently assigned
password for your reference.
Selecting WPA-Personal, or WPA2-Personal (WPA2-Personal recommended):
In the Security Mode drop-down list, make selection and enter passphrase.
• WPA passphrase: Enter the passphrase.
o This is the password or key that is used to connect your computer to the router
wirelessly; now you have the TEW-800MB connect to your router as wireless
client.
Note: 8-63 alphanumeric characters (a,b,C,?,*, /,1,2, etc.)
TEW-800MB
17