Set Up Dhcp Reservation - TRENDnet TEW-733GR User Manual

TRENDnet User's Guide
• DHCP Server: Enable or Disable the DHCP server.
• DHCP IP Address Range: Enter the start and end for the DHCP server range.
Note: The Start IP and End IP specify the range of IP addresses to automatically
asign to computers or devices on your network.
• Lease Time: Enter the DHCP lease time in minutes.
Note: The DHCP lease time is the amount of time a computer or device can keep
an IP address assigned by the DHCP server. When the lease time expires, the
computer or device will renew the IP address lease with the DHCP server,
otherwise, if there is no attempt to renew the lease, the DHCP server will
reallocate the IP address to be assigned to another computer or device.
4. To save changes, click Save Settings.
Dynamic DHCP List – You can view the list of active lease entries for computers or
devices that have been assigned IP addresses automatically from the DHCP server on
your router.
© Copyright 2012 TRENDnet. All Rights Reserved.

Set up DHCP reservation

Main > LAN
DHCP (Dynamic Host Configuration Protocol) reservation (also called Static DHCP) allows
your router to assign a fixed IP address from the DHCP server IP address range to a
specific device on your network. Assigning a fixed IP address can allow you to easily
keep track of the IP addresses used on your network by your computers or devices for
future reference or configuration such as virtual server (also called port forwarding, see
"Virtual Server" on page 34) or special applications (also called port triggering, see
"Special Applications" on page 36).
1. Log into your router management page (see
on page 22).
2. Click on Main, and click on LAN & DHCP Server.
3. Review the DHCP reservation settings.
• Check box: Check the box to enable rule.
• Name: Enter a name for the reservation.
• Static DHCP: Enable or Disable the DHCP reservation feature.
• IP Address: Enter the IP address to assign to the reservation. (e.g.
192.168.10.101)
Note: You cannot assign IP addresses outside of the DHCP range. The IP address is
required to be within the DHCP IP address range (Start IP & End IP).
• MAC Address: Enter the MAC (Media Access Control) address of the computer or
network device to assign to the reservation. (e.g. 00:11:22:AA:BB:CC) or click
TEW-733GR
"Access your router management page"
29