TRENDnet TEW-733GR User Manual page 9

TRENDnet User's Guide
Hardware Installation
1. Verify that you have an Internet connection when connecting your computer directly
to your modem.
2. Turn off your modem.
3. Disconnect the Network cable from your computer to your modem.
4. Use a Network cable and connect the WAN port (yellow port) on the router to your
modem.
5. Use another Network cable and connect your computer to one of the four LAN ports
on the router.
6. Plug in the power adapter, connect it to the router's power port, and then push the
On/Off Power Switch to the "On" position (pushed in).
7. Turn on your modem.
8. Verify that the following front panel LED indicators on your router: Power (Solid
Green), Status (Blinking Green), LAN 1, 2, 3, or 4 (Solid/Blinking Green for ports for
which devices are connected), WAN (Solid/Blinking Green), and WLAN (Blinking
Green).
© Copyright 2012 TRENDnet. All Rights Reserved.
Setup Wizard
1. Open your web browser and the router's configuration screen will automatically
appear. If not type, http://tew-733gr
2. Select the language to use on the bottom drop-down list to select your preferred
language. Enter the default user name and password and then click Login to continue.
Default User Name: admin
Default Password: Please refer to the device label or wireless sticker on the unit for
more information.
Note: For added security your router has a unique login password and wireless
settings.
3. Once you are logged in to the router. You will begin the router's setup wizard. Click
Next.
TEW-733GR
on the address bar of your web browser.
9