Wind Noise Reduction; Microphone Setup - Panasonic HDCTM300 - HD SD CAMCORDER Operating Instructions Manual

Function
Digital cinema color

Wind noise reduction

Microphone setup

[SURROUND]:
Sound is recorded with
5.1 ch surround microphone.
[ZOOM MIC]:
Directivity of the microphone
is synchronized with the
zoom operation. Sounds
near the front of the unit are
recorded more clearly if you
zoom in (close-up) and
surrounding sounds are
recorded more realistically if
you zoom out (wide angle).
[FOCUS MIC]:
Directivity of the center is
enhanced for recording audio
near the front of the unit
more clearly.
74
VQT1Z09
Recording motion pictures with more vivid colors, using
™
x.v.Color technology.
≥ Change the mode to
≥ The Intelligent Auto Mode is set to off. (l 47)
Select the menu. (l 33)
[RECORD SETUP] # [Digital Cinema Color] # [ON]
≥ For more realistic colors, use an HDMI mini cable with a TV that
supports the x.v.Color
This is for reducing the wind noise coming into the built-in
microphones depending on the wind strength.
≥ Change the mode to
≥ The Intelligent Auto Mode is set to off. (l 47)
Select the menu. (l 33)
[RECORD SETUP] # [WIND CUT] # [ON]
≥ This function's default setting is [ON].
Directivity (sound sensitivity direction) of the built-in
microphones can be adjusted.
≥ Change the mode to
≥ The Intelligent Auto Mode is set to off. (l 47)
Select the menu. (l 33)
[RECORD SETUP] # [MIC SETUP] # desired setting
≥ This function's default setting is [SURROUND].
Effect/Setting method
.
™
.
.
.