Photo Mode Playback; How To Specify Print Options (Dpof); Dpof Set Frame - FujiFilm FinePix FinePixF420 Owner's Manual

HOW TO SPECIFY PRINT OPTIONS ( DPOF )

PHOTO MODE PLAYBACK

DPOF stands for Digital Print Order Format and refers to a format that is used for
recording printing specifications for images shot using a digital camera on media such as
an xD-Picture Card. The recorded specifications include information on which frames
are to be printed.
This section gives a detailed description of how to order your prints with the FinePix F420.
On the FinePix F420, you can specify only one print per image in the DPOF settings.
✽ Note that some printers do not support date and time imprinting or specification of the
number of prints.
✽ Note that the warnings shown below may be displayed while you are specifying the
prints.
When you erase the image, the DPOF setting for that image is deleted at the same
time.
(➡P.53)
When you insert an xD-Picture Card that contains frames specified for printing on by
another camera, those print specifications are all reset and replaced by the new print
specifications.
(➡P.82)
Up to 999 frames can be specified on the same xD-Picture Card.
52
(➡P.45)

DPOF SET FRAME

PHOTO MODE PLAYBACK
1
1 0 0 2
2
ＤＰＯＦ ＤＰＯＦ
ＷＩＴＨＯＵＴ ＤＡＴＥ ＷＩＴＨＯＵＴ ＤＡＴＥ
ＷＩＴＨ ＤＡＴＥ ＷＩＴＨ ＤＡＴＥ
3
0 1 0 2
ＤＰＯＦ ＤＰＯＦ
ＷＩＴＨＯＵＴ ＤＡＴＥ ＷＩＴＨＯＵＴ ＤＡＴＥ
ＷＩＴＨ ＤＡＴＥ ＷＩＴＨ ＤＡＴＥ
N
When DPOF settings were specified on another camera
１００ー０００９ １００ー０００９
ＲＥＳＥＴ ＤＰＯＦ ＯＫ？ ＲＥＳＥＴ ＤＰＯＦ ＯＫ？
BACK BACK ＮＯ ＮＯ ＯＫ ＯＫ ＹＥＳ ＹＥＳ
1 Set the Mode switch to " ".
2 Press the Photo mode ( ) button.
Press "d" or "c" to select " " DPOF.
During playback,
１００−０００９ １００−０００９
check that the "
appears for the DPOF
settings that have
been specified.
９／ １／２００３ ９／ １／２００３
1 Press "a " or "b " to select "WITH DATE" or
"WITHOUT DATE". Selecting "WITH DATE" will
cause the date to be imprinted on your prints.
2 Press the "MENU/OK" button.
G
!
By selecting the "WITH DATE" setting, you can have the date
imprinted on your shots when you use the Print Service or a
DPOF-compatible printer (depending on the printer
specifications, the date may not be printed in some cases).
N
When the data includes a frame (file) with DPOF
setting that were specified on another camera,
" " appears.
Pressing the "MENU/OK" button (or Photo mode ( )
button) erases all of the DPOF settings already
specified for each frame (file). You must then specify
the DPOF setting for each frame (file) again.
G
!
Press the "BACK" button to leave the previous settings
unchanged.
Continued
"
53