Reducing Camera Shake - JVC Everio GZ-E300 User Manual

Recording
4
Tap "CANCEL".
.
5
Tap the person to cancel registration of.
.
A appears on the selected person.
0
To remove A from a person, tap on the person again.
0
6
Tap "SET".
.
7
Tap "YES".
.
Tap "YES" to delete the face information of the selected person.
0
Tap "NO" to return to the previous screen.
0
Tap "OK" when the deletion complete screen appears.
0
52

Reducing Camera Shake

When the image stabilizer is set, camera shake during video recording can
be effectively reduced.
1
Open the LCD monitor.
.
2
Press the a button to change the setting.
.
The setting of image stabilizer changes with every press.
0
Setting
b OFF Deactivates image stabilizer.
a ON Reduces camera shake under normal shooting
conditions.
Reduces camera shake more effectively when
r ON (AIS)
shooting bright scenes on the wide angle end.
(A video mode only)
Only on the wide angle end (approx. 5x).
Memo :
It is recommended to set the image stabilizer to "OFF" when shooting a
0
subject of little movement with the unit on a tripod.
Complete stabilization may not be possible if camera shake is excessive.
0
When "ON (AIS)" is set, the angle of view becomes narrower. In the
0
enhanced AIS mode, the angle of view becomes even narrower than "ON
(AIS)".
Image stabilization only starts when the SNAPSHOT button is pressed
0
halfway during still image recording.
Details