Names Of Buttons And Functions On The Lcd Monitor - JVC Everio GZ-E300 User Manual

Getting Started
.
Setting ends and returns to the menu screen.
0
Caution :
Do not tap areas other than the "+" mark during touch screen adjustment
0
(steps 4 - 5). Doing so may cause the touch screen to malfunction.
Memo :
Adjust by lightly tapping with a corner of an SD card, etc.
0
Do not press with an object with a sharp tip or do not press hard.
0
16

Names of Buttons and Functions on the LCD Monitor

The following screens are displayed during the video and still image modes,
and operate as the touch screens.
Recording Screen (Video/Still Image)
.
1
A/B (Video/Still Image) Mode Button
Switches between video and still image modes.
0
2
Zoom Button
"Zooming" (A p. 30)
3
Playback Mode Button
Switches to the playback mode.
0
4
Recording Start/Stop Button
6: Video Recording Start Button
0
7: Video Recording Stop Button
0
Q: Still Image Recording Button
0
5
Mark Button (for video only)
By tapping the icon while recording is in progress, you can mark a
0
particular scene to make it easier to find it.
"Marking the Video While Recording" (A p. 53)
6
Menu Button
"Operating the Menu" (A p. 224)
7
Display Button
Switches the display between full (m) and simple (n) with every tap of
the button.
Simple display: Some displays disappear after approximately 3
0
seconds.
Full display: Displays everything. The display button changes from n
0
to m.
When the power is turned off, simple display (n) will be set.
0
8
Recording Mode Button
Switches the recording mode between P Intelligent Auto and H
Manual.