JVC Everio GZ-E300 User Manual page 160

Using Wi-Fi (GZ-EX355/GZ-EX310)
Tap "A/a/1" to select character input type from upper case letter, lower
0
case letter, and number.
Tap E or F to move one space to the left or right.
0
After setting, tap "SET".
0
9
Tap "CHANGE" to change the SMTP port.
(In case of Gmail, tap "SKIP")
(Operation on this camera)
.
Change the SMTP port number (if necessary) and tap "SET".
0
.
Tap on the on-screen keyboard to enter characters. The character
0
changes with every tap.
Tap "DELETE" to delete a character.
0
Tap "CANCEL" to exit.
0
Tap E or F to move one space to the left or right.
0
After setting, tap "SET".
0
10
Tap "CHANGE" to change the authentication.
(In case of Gmail, tap "SKIP")
(Operation on this camera)
.
Tap the desired "AUTHENTICATE METHOD".
0
.
11
Tap "NEXT".
(In case of Gmail, tap "SKIP")
(Operation on this camera)
.
The following does not appear if "AUTHENTICATE METHOD" is set
0
to "NONE".
Tap "CHANGE" to change the contents that are already set.
0
160
Enter the username and tap "SET".
0
.
Tap on the on-screen keyboard to enter characters. The character
0
changes with every tap.
Tap "DELETE" to delete a character.
0
Tap "CANCEL" to exit.
0
Tap "A/a/1" to select character input type from upper case letter, lower
0
case letter, and number.
Tap E or F to move one space to the left or right.
0
After setting, tap "SET".
0
12
Tap "NEXT".
(Operation on this camera)
.
The following does not appear if "AUTHENTICATE METHOD" is set
0
to "NONE".
Tap "CHANGE" to change the contents that are already set.
0
Enter the password and tap "SET".
0
.
Tap on the on-screen keyboard to enter characters. The character
0
changes with every tap.
Tap "DELETE" to delete a character.
0
Tap "CANCEL" to exit.
0
Tap "A/a/1" to select character input type from upper case letter, lower
0
case letter, and number.
Tap E or F to move one space to the left or right.
0
After setting, tap "SET".
0
13
Tap "QUIT" or "SEND TEST EMAIL".
(Operation on this camera)
.
SENDER'S EMAIL Enter the sender's e-mail address.
SMTP SERVER Enter the SMTP server address.
SMTP PORT Set this when the SMTP port number needs to be
changed.