Registering The Mac Address (Tv Monitoring); Checking The Mac Address Of This Camera - JVC Everio GZ-E300 User Manual

Registering the MAC Address (TV MONITORING)

Register the MAC address of the TV monitor to Everio.
1
Tap "MENU".
(Operation on this camera)
.
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
(Operation on this camera)
.
3
Tap "TV MONITORING".
4
Tap "MAC ADDRESS LIST".
5
Tap "ADD".
6
Enter the MAC address of the TV monitor.
Tap on the on-screen keyboard to enter characters.
0
Tap "DELETE" to delete a character.
0
Tap "CANCEL" to exit.
0
Tap "A/a/1" to change the characters.
0
Tap E or F to move one space to the left or right.
0
After setting, tap "SET".
0
For details on checking the MAC address for registration, refer to the
0
instruction manual of the device in use.
Using Wi-Fi (GZ-EX355/GZ-EX310)

Checking the MAC Address of this Camera

Displays the MAC address of the camera.
1
Tap "MENU".
(Operation on this camera)
.
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
(Operation on this camera)
.
3
Tap 1 on the lower right of the screen.
(Operation on this camera)
.
4
Tap "COMMON Wi-Fi SETTING".
(Operation on this camera)
.
5
Tap "MAC ADDRESS".
(Operation on this camera)
.
The MAC address of the camera appears.
0
(The above shows the address during direct connection, while the
below shows the MAC address when connected to an access point.)
After setting, tap "SET".
0
After checking, tap "SET".
0
171