Thermal Protector; Automatic Adjusting Nozzle - Panasonic MC-UG728 Operating Instructions Manual

Mcug728 user guide
Table of Contents

Advertisement

➢ If a clog prevents the normal flow of air to the motor, the thermal protector turns the
motor off automatically to allow the motor to cool in order to prevent possible
damage to the vacuum cleaner.
➢ To correct problem, turn off and unplug vacuum cleaner, remove clogs, and/or
clean/replace filters.
➢ Replace full bag if necessary.
➢ Wait approximately thirty (30) minutes, plug vacuum cleaner in, and turn on to see if
thermal protector has reset. Thermal protector will not reset if vacuum cleaner is not
turned off even if vacuum cleaner cools down.
Shallow
Pile Carpet
Moquette à
poils courts
Alfombra de
Deep Pile
pelo corto
Carpet
Moquette à
poils longs
Alfombra de
pelo largo

Thermal Protector

Automatic Adjusting Nozzle

Nozzle
Tête
d'aspiration
Boquilla
Pivot Point
Point
d'articulation
Botón de
liberación
➢ The nozzle of your Panasonic
vacuum cleaner automatically
adjusts to any carpet pile height.
➢ Feature allows nozzle to float evenly
over carpet pile surfaces.
➢ No manual adjustments required.
- 34 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mc-ug729

Table of Contents