Using The Nose Cap - Hitachi NT65M2 - to 2-1 16 Gauge Finish Nailer Instruction And Safety Manual

USING THE NOSE CAP

● When attaching or detaching the nose cap, be sure to remove
your finger from the trigger and disconnect the air hose from the
nailer.
If you like to protect the surface of workpiece against scratches or markings made by the
push lever, attach the accessory nose cap to the push lever.
1 DISCONNECT AIR HOSE FROM NAILER.
2 Put the nose cap to the toe of the push lever.
NOTE:
● The nose cap may reduce nailing depth due to its thickness. Re-adjustment of nailing
depth is required.
WARNING
Nose cap
2
Push lever
1
Disconnect
air hose
English
23