Embroidery Template; Hooping The Fabric - Bernina 830LE Manual

Hooping the Fabric

124
Centering
► determine the center of the fabric to be embroidered
► mark with a fabric marker or chalk
Using the Embroidery Hoop
► loosen the screw(s)
► remove the inner hoop
► the arrows on both hoops must match
► the arrows on the large and medium hoops and on the
Mega Hoop are at the center front, on the small hoop,
they are to the right side

Embroidery Template

► there is an embroidery template for each hoop
► the embroidery area is marked in 3/8" (1cm) squares
► the center and end point holes of the center lines are
with holes for transferring marks to the fabric
► place the template in the inner hoop, so the BERNINA
logo is at the front edge (by the arrows) and can be read
► placed in this way, the template sits automatically in the
inner hoop
► the finger hole or the template holder make it easier to
remove the template from the hoop
Hooping the fabric
► place the fabric on the outer hoop; line up the marked
center point on the center of the template
► place the fabric and inner hoop on the outer hoop
► match the arrows of both hoops
► fit hoops into each other; ensure that the fabric does not
move
► hoop the material to be embroidered tightly, tighten the
screw
► remove the template