Monitor Connection - Sanyo VCC-XZ600N - Network Camera - Weatherproof Installation Manual

Connections
Coaxial cable
Digital video recorder etc.

Monitor Connection

• Using different cables from
those specified here may
attenuate the video and/or sync
signals and interfere with
correct transmission.
• RG-59U coaxial cables can be
used when distance between
devices is short, but not in duct
or aerial routing.
Cable type
RG-59U (3C-2V)
RG-6U (5C-2V)
RG-11U (7C-2V)
Note:
All connection cables should be 24 AWG or
higher with a maximum length of no more than
600 m (656 yds).
BNC type
Length
250 m (273 yds) max.
500 m (547 yds) max.
600 m (656 yds) max.
Shielded LAN cable
(CAT5 or higher, straight type)
See "Connection when Using PoE
Power Supply" or "Connection when
Not Using PoE Power Supply".
RED
WHITE
1 Push and hold the lever a, and
then insert the cable into the
terminal hole
2 Release the lever
Power Supply Connection
b With AC 24 V
✱
b With DC 12 V
Check that +/- polarity is correct.
✱
✱ For the connections, use AWG (20, 21, 22)
cables.
9
A
B
B
.
A
.
~
~
GND
(+)
(–)