Adjusting with the remote control
1. Hold the CTL button and press the ECO/L-SHIFT button.
The Lens Shift screen will be displayed.
2. Press the ▼▲◀ or ▶ button.
Use the ▼▲◀▶ buttons to move the projected image.
TIP:
• The diagram below shows the lens shift adjustment range for the desktop front. To raise the projection position higher than this,
use the tilt feet. (→ page 25)
* The maximum adjustable range for lens shift (V) is 0.5V when the NP32ZL lens is used.
2. Projecting an Image (Basic Operation)
Width of projected image
0.55V*
1V
0.4V
0.2H
28
Height of projected image
1H
0.2H